The reinforcement mesh is formed by perpendicularly joined rods that form a strong net. The mesh is based on glass fibre rods with a circular cross-section, which are placed perpendicular to each other and firmly fixed to each other at the connection points. The cells in the grid are usually square, the minimum size is 50x50 mm, but products with larger cells (100x100, 150x150, 200x200) are also produced. Diameter from 2 to 6 mm. The composite mesh is made in the form of rolls or cards (sheets). The width of the grid can be up to 2 m, while the length can be any.
The chemical and physical properties of polymer compounds give them several advantages over metal.
30% benefit with equal replacement of metal reinforcement for the composition
100% non-rusting and moisture resistant, not subject to corrosion and does not cause destruction of concrete
The composite reinforcement is tied with wire or joined with plastic fasteners.
Increases the service life of the structure by 2-3 times (50-80 years). The need for expensive repairs disappears
Reduces the cost of transportation and loading and unloading operations, and also facilitates the execution of work in the facility
Does not create screen and interference for radio waves, cellular communications and Wi-Fi
From -70 to +2000С does not change its operational characteristics, which excludes cracking
It does not emit harmful and toxic substances. Complies with all European standards. Does not harm nature
At the request of the customer, unlike the metal of 6 or 12 meters.
100 times lower than steel, significantly reducing heat loss
The composite reinforcement is 2-2.5 times stronger than metal with the same diameter.
Not electrically conductive, electrically safe
The combination of material properties creates, in accordance with GOST 31938-2012, a number of recommended applications where it is recommended to replace traditional steel reinforcement with fibreglass.
The polymer composite reinforcement is intended to reinforce heavy, fine-grained and lightweight aerated concrete structures, even under conditions of exposure to aggressive media containing chloride salts, alkalis and acids, as well as under the systematic effects of temperatures from minus 70 ° С to 100 ° С.
Reinforcing mesh made of glass composite material replaces steel with diameter preservation
Currently there is no regulatory documentation that strictly regulates the use of composite meshes. In this regard, the use of this product in large government buildings is not permitted. Most of it is intended for private construction.
To order products, please use the feedback form or contact the contacts listed on the contact